Origin	China
Model Number	GTCNC-150iT-II

FEATURES

*Controllable axes:2-5.

*Linkage axes: linear 2-5, circular 2 axes.

* 32 bits 200MHz ARM Industrial microprocessor

*32MB user memory

*8.4 inch TFT colorful LCD display.

*Real-time and all-round self-diagnosis function.

*Feed per minute, feed per revolution.

*Metric system, English system input mode.

*Linear, circular, thread interpolation can realize machining of metric/inch single/ multi-thread, taper thread, end-face thread, variable pitch thread, continual thread

*Multiple Compound cycle instructions, such as ex-circle rough turned compound cycle, head face rough turned compound cycle, complex type outline rough turned compound cycle, outer diameter/inside diameter /grooving compound cycle, thread cutting compound cycle etc

*Automatic backlash compensation and storage type pitch error compensation. Tool length automatic compensation, tool radius compensation.

*Set the max speed and up-down speed of each axis independently.

*Shift of programmed unit between metric and British mode

*Setting of auxiliary axis’ angle and displacement programme.

*Multiple coordinate system setting.

*Soft and hard limit function for max stroke.

*Powerful tool management function: Managing 99 tools and can control diverse tool post (such as electrical, hydraulic, servo).

*Display current time, single piece time and running time.

*Multiple interpolation function and M, S, T function.

*Parameter, software backup and upgrade function.

.SPEED

*Max rapid traverse : 60m/min

*Max cutting speed: 20m/min

*Program preview, realizing smooth connection between blocks

.PRECISION

*Screw pitch compensation, improving machining precision to the most

*Pulse equivalent: max precision can be set as 0.0001mm

.INTERFACE

*Embedded PLC with I/O number 118 x 46, users can free to edit.

*USB port,RS232 port supply DNC function by transmit rate 115200bit.

*MPG on board or separate MPG are available.

*Dual channel control of spindle speed, can control two spindle Units and diverse tool post.

>OPERATION

*Full-screen editing interface and foreground-background processing operation, which can do programming, parameter adjustment etc at the same time

*2D/3D graphic preview or simulating operation before machining, coordinates display, free shifting between 2D/3D graphic; graphic can be scale up/scale down, translate and rotate freely.

*Multilevel password protection, such as program, parameter protection to convenient equipment management

*Start machining at random block or tool number

*Compatible with popular international CNC system in instruction code and most program can be run directly without amendment